GENERAL INFORMATION

The vertical lathes series are of the highest quality structure with heavily ribbed construction for superior rigidity, strength and dimensional stability with enhanced wear characteristics, designed to perform turning, milling, drilling and threading, for both roughing and finishing operations.

•  Horizontality adjustment devices;
•  Telescopic covers for X axis;
•  CE certificated machine safety guard;
•  Chips conveyor;
•  Universal turning tool holder;
•  Electrical box cooling system;
•  Machine lighting system.

The vertical turning lathes are efficient heavy machine tools with the following optional features:

•  Complete careening;
•  Telescopic covers for W axis;
•  Work-piece touch probe – Renishaw made;
•  Tool-probe – Renishaw made;
•  Hydrostatic faceplate bearing;
•  Angular milling head;
•  Bi-rotative milling head CNC;
•  Grinding device;
•  Dressing device;
•  ATC disk type 6/12/16 tool-stations;
•  ATC chain type 16/20/24 tool-stations;
•  Cooling system 3/20/40/80 bar.

Technical features

SpecificationsM.U.SCR 30SCR 35SCR 40SCR 45SCR 50SCR 55SCR 60SCR 70
Swing diameter mm3.0003.5004.0004.5005.0005.5006.0007.000
Machining Diametermm3.0003.5004.0004.5005.0005.5006.0007.000
Table Diametermm2.6002.600/3.0003.4004.0004.0004.7005.0006.000
Machining Heightmm2.000 / 2.500 / 3.0002.000 / 2.500 / 3.0002.000 / 2.500 / 3.0002.000 / 2.500 / 3.000 / 3.5002.000 / 2.500 / 3.000 / 3.5002.000 / 2.500 / 3.000 / 3.5002.000 / 3.000 / 4.000 / 5.0002.000 / 3.000 / 4.000 / 5.000
Work Piece Weight:
Standard – Cross roller bearingkg25.00025.00025.00030.00030.00030.000
Optional – Hydrostatic bearingkg50.00050.00050.00060.00060.00060.000100.000100.000
Motors Capacity
Main Motor PowerkW606060606060100100
C axis motor torqueNm100100100100100100100100
Stroke
X axismm100/1.600100/1.850100/2.100100/2.350100/2.600100/2.850100/3.100100/3.600
Z axismm1.250 / 1.500 / 1.7001.250 / 1.500 / 1.7001.250 / 1.500 / 1.7001.250 / 1.500 / 1.700 / 1.8501.250 / 1.500 / 1.700 / 1.8501.250 / 1.500 / 1.700 / 1.8501.250 / 1.500 / 2.000 / 2.500 / 3.0001.250 / 1.500 / 2.000 / 2.500 / 3.000
Wmm1.500 / 2.100 / 2.4001.500 / 2.100 / 2.4001.500 / 2.100 / 2.4001.500 / 2.100 / 2.400 / 3.0001.500 / 2.100 / 2.400 / 3.0001.500 / 2.100 / 2.400 / 3.0001.500 / 2.400 / 3.300 / 4.4001.500 / 2.400 / 3.300 / 4.400
Feed
X workmm/min0.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.000
Z workmm/min0.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.000
Wmm/min500500500500500500300300
X rapidmm/min10.00010.00010.00010.00010.00010.00010.00010.000
Z rapidmm/min10.00010.00010.00010.00010.00010.00010.00010.000
Table Speedrpm13013011010090905040
C axis Speedrpm0.0002-2.50.0002-2.50.0002-20.0002-1.80.0002-1.80.0002-1.50.0002-1.20.0002-1
Table Torque
Turning ModeNm68.00068.00095.000107.000130.000130.000250.000250.000
Milling Mode – C axisNm43.00043.00043.00062.00062.00062.000100.000100.000
Locking Table TorqueNm60.00060.00060.00075.00075.00075.000110.000110.000
RAM sizemm x mm250×250 / 300×300250×250 / 300×300250×250 / 300×300250×250 / 300×300250×250 / 300×300250×250 / 300×300300×300 / 400×400300×300 / 400×400
Milling Head
Milling Motor PowerkW22 / 3722 / 3722 / 3722 / 3722 / 3722 / 3737 / 5037 / 50
Speed range
Standardrpm0-3.0000-3.0000-3.0000-3.0000-3.0000-3.0000-2.0000-2.000
Optionalrpm0-8.0000-8.0000-8.0000-8.0000-8.0000-8.0000-8.0000-8.000
Tool-holder TypeISO50DIN 69871
Automatic Tool Changer
Number of tool stations6 / 12 / 16tool stations
Type of tool ShankISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO60 DIN69871ISO60 DIN69871
Max. tool size of ATCmm280x150x400280x150x400280x150x400280x150x400280x150x400280x150x400380x160x600380x160x600
Max. tool weightkg505050505050200200
Max load weight on ATCkg300 / 500 / 600300 / 500 / 600300 / 500 / 600300 / 500 / 600300 / 500 / 600300 / 500 / 6002.4002.400
Time of tool change – tool to toolsec.6060606060606060
Acurracy
P – X and Z axismm+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000
Ps – X and Z axismm+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010
P – C axisangle sec.+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″
Ps – C axisangle sec.+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″+/- 6″
Power CapacityKVA150150150160160180250250
Machine dimensionsmm7000×47007500×52008000×57008200×66008700×71009400×710014000×890015000×9300
Machine heightmm6800 / 7300 / 7800 / 83006800 / 7300 / 7800 / 83006800 / 7300 / 7800 / 83006800 / 7300 / 7800 / 83006800 / 7300 / 7800 / 83006800 / 7300 / 7800 / 83007500 / 8500 / 9500 / 105007500 / 8500 / 9500 / 10500
Machine weight – 2000 mm Hkg590006300069000750008200091000125000138000
SpecificationsM.U.SCR-W 30SCR-W 35SCR-W 40SCR-W 45SCR-W 50SCR-W 55SCR-W 60SCR-W 70
Swing diameter mm3.0003.5004.0004.5005.0005.5006.0007.000
Machining Diametermm3.0003.5004.0004.5005.0005.5006.0007.000
Table Diametermm2.6002.600/3.0003.4004.0004.0004.7005.0006.000
Machining Heightmm1.0001.0001.0001.0001.0001.0001.0001.000
Work Piece Weight:
Standard – Cross roller bearingkg25.00025.00025.00030.00030.00030.000
Optional – Hydrostatic bearingkg50.00050.00050.00060.00060.00060.000100.000100.000
Motors Capacity
Main Motor PowerkW606060606060100100
C axis motor torqueNm100100100100100100100100
Stroke
X axismm100/1.600100/1.850100/2.100100/2.350100/2.600100/2.850100/3.100100/3.600
Z axismm1.0001.0001.0001.0001.0001.0001.0001.000
Wmm800800800800800800800800
Feed
X workmm/min0.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.000
Z workmm/min0.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.0000.02 / 2.000
Wmm/min500500500500500500300300
X rapidmm/min10.00010.00010.00010.00010.00010.00010.00010.000
Z rapidmm/min10.00010.00010.00010.00010.00010.00010.00010.000
Table Speedrpm13013011010090905040
C axis Speedrpm0.0002-2.50.0002-2.50.0002-20.0002-1.80.0002-1.80.0002-1.50.0002-1.20.0002-1
Table Torque
Turning ModeNm68.00068.00095.000107.000130.000130.000250.000250.000
Milling Mode – C axisNm43.00043.00043.00062.00062.00062.000100.000100.000
Locking Table TorqueNm60.00060.00060.00075.00075.00075.000110.000110.000
RAM sizemm x mm250X250250X250250X250250X250250X250250X250250X250 / 300X300250X250 / 300X300
Milling Head
Milling Motor PowerkW22 / 3722 / 3722 / 3722 / 3722 / 3722 / 3737 / 5037 / 50
Speed range
Standardrpm0-3.0000-3.0000-3.0000-3.0000-3.0000-3.0000-3.0000-3.000
Optionalrpm0-8.0000-8.0000-8.0000-8.0000-8.0000-8.0000-8.0000-8.000
Tool-holder TypeISO50DIN 69871
Automatic Tool Changer
Number of tool stations6 / 12 / 16tool stations
Type of tool ShankISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO50 DIN 69871ISO60 DIN69871ISO60 DIN69871
Max. tool size of ATCmm280x150x400280x150x400280x150x400280x150x400280x150x400280x150x400380x160x600380x160x600
Max. tool weightkg505050505050200200
Max load weight on ATCkg300 / 500 / 600300 / 500 / 600300 / 500 / 600300 / 500 / 600300 / 500 / 600300 / 500 / 6002.4002.400
Time of tool change – tool to toolsec.6060606060606060
Acurracy
P – X and Z axismm+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000+/- 0.020 / 1000
Ps – X and Z axismm+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010+/- 0.010
P – C axisangle sec.+/- 6+/- 6+/- 6+/- 6+/- 6+/- 6+/- 6+/- 6
Ps – C axisangle sec.+/- 6+/- 6+/- 6+/- 6+/- 6+/- 6+/- 6+/- 6
Power CapacityKVA150150150160160180250250
Machine dimensionsmm7000×47007500×52008000×57008200×66008700×71009400×710014000×890015000×9300
Machine heightmm5.5005.5005.5005.5005.5005.5005.5005.500
Machine weightkg53.00057.00063.00069.00076.00085.000115.000125.000
DOWNLOAD ALL TECHNICAL SPECIFICATIONS
DOWNLOAD

MAIN OPERATIONS

The main operations that can be executed on the machines are:

•  internal and external longitudinal turning;
•  internal and external facing;
•  internal and external profiling;
•  plunging;
•  internal and external grooving;
•  face grooving;
•  internal and external undercutting
•  boring;

•  face milling;
•  shoulder milling;
•  profile milling;
•  slot milling;
•  boring;

•  short hole drilling;
•  deep hole drilling;

•  thread turning;

MACHINE STRUCTURE

The machine has a robust two-column design with one work head, the table is supported by means of a hydrostatic bearing (automatic regulation of the oil film thickness in dependence with speed and weight load of the table).

The heavy duty, heavily ribbed Meehanite cast iron bed is designed to absorb extreme cutting forces ensuring high rigidity and stability of the machine base.

The table is manufactured from high tensile Meehanite cast iron. It supports the part weight with a hydrostatic thrust bearing and radial centering is achieved by a double row, high-precision cylindrical roller bearing to resist heavy duty cutting loads in any direction. The table is equipped with hydraulic clamping device actuated by direct action bronze pistons.

Box type columns and top beam offer high rigidity. Slide ways on columns are precision ground. The positioning racks, located on each column, are precision ground to ensure superior leveling accuracy between the positioning hooks and racks.

The cross rail elevates in 200mm increments to achieve high squareness between the ram and the cross rail.

The box type cross rail is manufactured from high tensile Meehanite cast iron for maximum resistance to static, dynamic, torsion, and bending stresses. The heavily walled and multi ribbed design allows low heat transference to retain good thermal stability. Slide ways are high frequency heat treated and precision ground. The saddle slide ways are coated with aluminum bronze which has a constant friction coefficient at high/low feed rates, ensuring smooth traverse and accurate positioning control.

The rapid feed rate for the cross rail is up to 400mm/min. The mechanical locking device prevents the cross rail from dropping in case of a sudden power failure. If power failure occurs, the device actuates instantly to provide mechanical locking to the cross rail.

Dual drive system provides an output of 226 kW (continuous rating). Each motor is coupled with a dual speed planetary gearbox which ensures that the input energy is transmitted into high torque at low speeds and high power at high speeds, making the machine ideal for machining all types of material. Maximum achievable torque of the spindle is 270.000 Nm; maximum table speed is 50 rpm.

The live spindle provides an output of 37kW (continuous rating). A dual speed gearbox is integrated in-line between a water cooled motor and a spindle inside the ram. This compact, light-weight design matches the latest spindle drive motor technology. Maximum achievable torque of the live spindle is 1050 Nm; maximum speed is 3000 rpm.

High precision C-Axis positioning is achieved by driving one drive in one direction rotating the crown gear, while the other drive is rotated in the opposite direction. This applies a counterforce, which preloads the helical drive removing any backlash from the system.

The heavy duty rail head is a one piece high quality Meehanite cast iron designed to ensure high rigidity and stability under extreme cutting conditions.
The work head moves along the cross rail guideways by a servomotor driven ballscrew, precision ground IT3 class, coupled with a planetary gearbox for servomotor. Since the power is distributed to three planetary gears of the gearbox, thereby distributing the forces evenly, this allows a very compact design with high power density.
The special design ram is made of high quality forged steel (400 x 400) to achieve resistance to static, dynamic, torsion and bending stresses. The ram slide ways are high frequency heat treated and precision ground. The ram is driven thru an IT3 precision class ground ballscrew by a servomotor coupled with a planetary gearbox.

The main operations are accomplished using the control panel, the auxiliary control desk, the control desk or the CNC equipment. The table rotation, the feeds of the work head (CNC operations) panel is performed using the control desks. The auxiliary control desks are used for the manual lubrication, the current movement of the control panel.
The control central desk ensures the control of the rail head the cross-rail movement and can also signal the possible damages. The machine has suitable safety devices to provide protection to the operator and the machine against all possible operational and machinery failures.

Fully guarded ATC located on the cross rail. The automatic tool changer employs the BT-50 tooling sys¬tem, can fit both turning and milling tool holders, consisting of 8, 12 or 16 tool hold¬ers. Tool selection is bi-direc¬tional and by shortest route.

The machine is provided with one operator platform located on the cross rail to cover total turning height. It can accommodate the full travel of the working head.

The table is surrounded by a gutter type system that allows the chips and coolant to fall unobstructed away from the machining area into one belt type chip conveyor located in front of the machine bed below the table and the drive mechanisms.

The measuring systems for the axes are either optical scales, which are pressurized with a dedicated unit of purified compressed air, or rotary encoders.

•  Singular linear scales for each of the X and Z-axes.

•  Angle encoder for the C-axis and rotary encoder for main and live spindles orientation.

•  Lubrication System

An independent oil recovery and filtering system supplies hydrostatic lubrication to the table, with safety pressure switches. Automatic lubrication of the machines guideways is carried out on continuous cycle by independent motor-driven pump, complete with filter and safety pressure switch. The oil temperature is stabilized by the PLC controlled cooling circuit.

The coolant system is a combination external flood with output at the spindle front and the internal output through spindle. . A 2000-liter tank with an electro-pump for circuits feeding is supplied. The circulation filtering system is comprised of two filtering stages, a pre-filter and two fine filter cartridges, with clogging indicator.
•  Checking devices for coolant levels in the tank are provided.
•  External flood coolant is delivered by swinging nozzles at the front of the ram.
•  Internal coolant through spindle is delivered through a rotating manifold located at the rear of the spindle and coolant flows to the tool through a line inside the spindle.
•  Coolant delivery selection can be either manual or by “M” functions.
•  The flow rate is regulated manually by changing the pump speed at the control.
•  The maximum external coolant rate is 100 liters per minute at a pressure of 3 bars.
•  The maximum internal coolant rate is 60 liters per minute at a pressure of 20 bars.

The electric cabinets are equipped with an air conditioner and the incoming power supply can be 230, 440, 460, 480 or 575 volts at ± 10%, 50 or 60 Hz at ±1%, 3 Ph.

•  Control and protection devices for motors
•  Numeric control with integrated logic
•  Cables connecting the machine to the electrical cabinets
•  Diagnostics and Monitoring
The machine is provided with a powerful diagnostics and monitoring system and is highly selective. The intervention of electro-mechanical or electronic protection is displayed independently. Any discrepancy between an operation and its command is displayed.
•  Each alarm corresponds to a Code Number and a message on the control screen.
•  The machine logic responds according to the fault severity.
•  The monitoring is integrated for malfunctions and programming errors.

REM’s Remote Monitoring System, R.M.S., was developed to transfer the machine’s data and operative conditions to the dedicated host computer, without any interference with the machine’s functioning. All aspects of the machine, such as PLC status, CNC programming, operations report, diagnostics, preventive maintenance and an “On Line” connection with REM Service Department, can be activated by REM. R.M.S. makes it possible to remotely modify software, to guide the inspection, repairs, or resolution of specific problems, constant and automatic registration of the events.

The machine is equipped with full-enclosed sheet metal enclosure guards. These guards are interlocked through the machine logic in such a way that the machine conforms to all Health and Safety requirements necessary for CE marking.

The safety enclosure of the machine consists of fabricated steel structures, net-type protections and controlled by safety switches, located around parts of the machine.Access doors are equipped with keys and electromagnetic locks.

•  Opening of safety doors causes the machine stop in a safe controlled sequence and this status is maintained while the door is open.
•  Miscellaneous
•  The ram guideways are protected by bellow covers. The cross rail and columns guideways are protected by telescopic covers
•  Centralized hydraulic and lubrication systems simplifying maintenance procedures.
•  Closed protection for cables and hydraulic pipes
•  Leveling and anchoring devices to the foundation
Machine functional and construction in compliance with European CE Safety Code

This post is also available in: Romanian